FA60 Flow Alarm
Aluminium low-pressure drop device
The MPB Series FA60 Flow Alarm will give a switched output at a predetermined flow, i.e. 4 L/min.
The FA60 Flow Alarm, being a low-pressure drop device, can be positioned either in-line or on a bypass system.

The MPB Series FA60 Flow Alarm will give a switched output at a predetermined flow,
i.e. 4 L/min.
The FA60 Flow Alarm, being a low-pressure drop device, can be positioned either in-line or on a bypass system.
Typical applications include pump failure alarm and detection of filter blockages etc.
The principle of operation is quite simple: Normal flow will lift the float up into the flow tube, but when the flow falls below a pre-set level the float drops and a magnet held within the float triggers a reed switch.
Series FA60 Features
· Instantaneous alarm signal
· Standard range of alarm settings
· Easy tube removal in-situ
· Frictionless, hence low head loss
· Dual switch option available
· Polycatbonate safety cover
· Minimal maintenance, long service life

Downloads
Chassis: Anodised aluminum to BSEN12373/AA25
End Connections: Glass filled nylon
Process Connections: ½” BSPPF
Cover: Polycarbonate
Seals: Viton
Metering Tube: Borosilicate glass
Scale: Permanently fired black ceramic
Float: Brass
Weight: 600 grams
Maximum Working Pressure: 10 bar g (non-shock)
Maximum Working Temperature: 100°C
Maximum Ambient Temperature: 60°C
Switch Rating: 240VAC maximum, 3A maximum, 100VA maximum
Ranges: Switch at 1, 2, 4, 5, 8, 10, 12 or 24 L/min
Power Supply Lead: 1 metre long (no isolation)