Industrial Probes and Analysers

The model 762 pH probe assembly is a loop-powered, isolated pH sensor, with all power being supplied from the two-wire current loop connection. The two-wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

The Model 556 EC toroidal conductivity probe is a large bore sensor available in polypropylene, mounted on a 316 stainless steel barrel. 556 sensors are suitable for most applications up to 70°C, and can accurately measure down to 100μS/cm.

DIW probes offer a rugged solution for monitoring and controlling pH levels for waste water treatment. The probes design reduces the build up of contamination and allows accurate readings to be taken for up to 12 months.

The C800 analyser converts an input from an electromechanical conductivity sensor to a 4-20mA signal for a PLC or chart recorder.

The analyser is a microprocessor-based instrument that has many user-friendly features - all of which are accesible through the water-resistant membrane keypad.

The model 762 fluoride probe assembly is a loop-powered, isolated fluoride sensor with all power being supplied from the two-wire current loop connection. The two-wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

The durable stainless-steel electrode is intended for use in high temperature (0-100°C) and pressure environments for low level conductivity. 

​

This sensor is designed to be compatible with the loop-powered (24V two-wire) C800 conductivity analyser.

The pH800 analyser converts an input from an electromechanical sensor to a 4-20mA signal for a PLC or chart recorder.

The analyser is a microprocessor-based instrument that has many user-friendly features - all of which are accessible through the water-resistant membrane keypad.

The CT700 is an on-line conductivity analyser available as a 4-wire mains powered unit or a 2-wire loop-powered unit.