SENSOLUTION™ C800 Analyser
2-wire Conductivity Analyser
The C800 analyser converts an input from an electromechanical conductivity sensor to a 4-20mA signal for a PLC or chart recorder.
The analyser is a microprocessor-based instrument that has many user-friendly features - all of which are accesible through the water-resistant membrane keypad.
The C800 is usually fitted alongisde a model 300 conductivity sensor.
Features:
Temperature compensated conductivity measurements
Local display of measurement and temperature - suitable for use as a stand-alone conductivity monitor.
Isolated 4-20mA signal.
Water-resistant membrane keypad
Plug and socket connectors for easy installation and maintenance.
Tool-free operation
Downloads
C800 Quick Start Guide
C800 Operation Manual
Technical Specifications:
Electrical
24V ±10% dc
4-20 mA signal ouput
Ranges
0 - 20.00 mS
0 - 200.0 mS
0 - 2000 uS
0 - 5000 uS
Temperature
Range
0 – 100 °C
Resolution
1 °C
Calibration
When an ATC probe is availble, offset to known temperature. Otherwise manual temperature can be set.
Ordering Information:
500/0085 C800 Analyser
500/0086 C800 Analyser in sighted aluminium enclosure
500/0041 C800 Analyser with contacting conductivity probe (K=0.1) amd 40cm wand
500/0042 C800 Analyser with contacting conductivity probe (K=0.1) amd 70cm wand
500/0043 C800 Analyser with contacting conductivity probe (K=0.1) amd 100cm wand
500/0045 C800 Analyser with contacting conductivity probe (K=1) amd 70cm wand
500/0045 C800 Analyser with contacting conductivity probe (K=1) amd 100cm wand