On-Line, Industrial Probes and Equipment

Professional solutions for monitoring pH, fluoride and conductivity

DIW

pH Probe

DIW probes offer a rugged solution for monitoring and controlling pH levels for waste water treatment. The probes design reduces the build up of contamination and allows accurate readings to be taken for up to 12 months.

SENSOLUTION™ C600

2-wire Contacting Conductivity Transmitter

The C600 is a microprocessor controlled, loop powered isolated conductivity transmitter with all power being supplied from the two wire current loop connection. Isolation enables the contacting probe to be at a potential relative to ground without affecting the integrity of the conductivity measurement. The two wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

SENSOLUTION™ CT700

Conductivity Analyser

Loop or mains power

The CT700 is an on-line conductivity analyser available as a 4-wire mains powered unit or a 2-wire loop-powered unit. The loop-powered unit requires a supply voltage between 16 and 35V and re-transmits the conductivity value by varying the loop current between 4 and 20mA. The mains powered unit runs on either 110 or 230V (specify the required voltage when ordering) and re-transmits the conductivity value on a separate 24V loop.

SENSOLUTION™ PH600/762

Fluoride Probe Assembly

The pH600/762 fluoride probe assembly is a loop-powered, isolated fluoride sensor with all power being supplied from the two-wire current loop connection. Isolation enables the probe to be at a potential relative to ground without affecting the integrity of the measurement. The two-wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

SENSOLUTION™ PH600/762

pH Probe Assembly

The pH600/762 pH probe assembly is a loop-powered, isolated pH sensor, with all power being supplied from the two-wire current loop connection. Isolation enables the probe to be at a potential relative to ground without affecting the integrity of the measurement. The two-wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

Part of the SDI group

Astles Control Systems Ltd

B3 Regent Park, Summerlys Road,

Princes Risborough, Bucks, HP27 9LE

t: 01844 273301

e: web.sales@astles.co.uk

Copyright © 2019 - 2020 Astles Control Systems Ltd