INDUSTRIAL PRODUCTS


pH700 pH Analyser

pH700 pH Analyser

The pH700 is an on-line 4~20mA pH analyser with temperature compensation.

  • Loop (24V) or mains powered
  • Dual analogue outputs
  • Alarm relays
  • Configurable for PID control
  • Two-point calibration with auto-buffer recognition
 

CT700 Conductivity Analyser

CT700 Conductivity Analyser

The CT700 is an on-line 4~20mA conductivity analyser with temperature compensation.

  • Loop (24V) or mains powered
  • Analogue output
  • Alarm and control relays (AC power only)
  • One- or Two-point calibration
 

Sensolution™ C600 Conductivity Transmitter

Sensolution™ C600 Conductivity Transmitter

The C600 is a microprocessor controlled, loop powered isolated conductivity transmitter with all power being supplied from the two wire current loop connection. Isolation enables the contacting probe to be at a potential relative to ground without affecting the integrity of the conductivity measurement. The two wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

  • Temperature-compensated conductivity measurement.
  • Two-wire field mounted transmitter – suitable for multiple-loop installations with a central controller.
  • Local display of conductivity and temperature – suitable for use as a stand-alone conductivity monitor.
  • Isolated 4-20mA signal.
  • Simple pushbutton operation.
  • Plug and socket connectors for easy installation and maintenance.
  • Tool-free operation – no dip-switches or potentiometers.

pdf C600 instructions (1.30MB)

 

Sensolution™ pH600 pH Transmitter

Sensolution™ pH600 pH Transmitter

The pH600 is a microprocessor controlled, loop powered isolated pH transmitter with all power being supplied from the two wire current loop connection. Isolation enables the pH probe to be at a potential relative to ground without affecting the integrity of the pH measurement. The two wire connection eliminates the requirement of a separate supply in addition to the loop supply voltage.

  • Temperature-compensated pH or ORP measurement.
  • Two-wire field mounted transmitter – suitable for multiple-loop installations with a central controller.
  • Local display of pH/ORP and temperature – suitable for use as a stand-alone pH monitor.
  • Isolated 4-20mA signal.
  • Simple pushbutton operation.
  • Plug and socket connectors for easy installation and maintenance.
  • Tool-free operation – no dip-switches or potentiometers.

pdf pH600 instructions (0.32MB)

 

Model 762 Probe Holder

Model 762 Probe Holder

The Model 762 Assembly is a robust, cost effective and reliable solution for on-line monitoring of chemical processes.
The 762 can be used for:

  • pH
  • Redox (ORP)
  • Fluoride ppm or RmV
  • Ion Selective Electrodes
  • Conductivity
  • Temperature
 

DIW-pH Probe

DIW-pH Probe

  • pH probe with dip wand
  • Low maintenance PVC body
  • Integrated ceramic junction and gel electrolyte
  • 6m cable
  • BNC connector
  • Replaces the discontinued DIW711
 

Durafet[sup ®] pH Sensor

Durafet® pH Sensor

The Durafet® pH electrode is an industrial, non-glass, unbreakable, Ion Sensitive Field Effect Transistor (ISFET)-based pH sensor.

Durafet® electrodes are designed for use in applications where a glass sensor is not suitable, such as:

  • Wastewater influent/effluent monitoring
  • Neutralization
  • Food and dairy quality control
  • Reagent addition control
  • Plating
  • Pharmaceutical

Durafet® electrodes include a connector, enabling easy and reliable electrode replacement without twisting of cables.

 

Grundfos DDA 30-4 Pump

Grundfos DDA 30-4 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 30 L/hr
  • Minimum dose rate: 0.03 L/hr
  • Maximum operating pressure: 4 bar
  • 100-240 V; 18 W; 50-60 Hz
  • Optional flow monitoring

pdf Instruction Manual (4.08MB)
pdf Accessories (7.23MB)

 

Grundfos DDA 17-7 Pump

Grundfos DDA 17-7 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 17 L/hr
  • Minimum dose rate: 0.017 L/hr
  • Maximum operating pressure: 7 bar
  • 100-240 V; 18 W; 50-60 Hz
  • Optional flow monitoring

pdf Instruction Manual (4.08MB)
pdf Accessories (7.23MB)

 

Grundfos DDA 12-10 Pump

Grundfos DDA 12-10 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 12 L/hr
  • Minimum dose rate: 0.012 L/hr
  • Maximum operating pressure: 10 bar
  • 100-240 V; 18 W; 50-60 Hz
  • Optional flow monitoring

pdf Instruction Manual (4.08MB)
pdf Accessories (7.23MB)

 

Grundfos DDA 7.5-16 Pump

Grundfos DDA 7.5-16 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 7.5 L/hr
  • Minimum dose rate: 0.0025 L/hr
  • Maximum operating pressure: 16 bar
  • 100-240 V; 18 W; 50-60 Hz
  • Optional flow monitoring

pdf Instruction Manual (4.08MB)
pdf Accessories (7.23MB)

 

Grundfos DDC 15-4 Pump

Grundfos DDC 15-4 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 15 L/hr
  • Minimum dose rate: 0.015 L/hr
  • Maximum operating pressure: 4 bar
  • 100-240 V; 14 W; 50-60 Hz

pdf Instruction Manual (3.21MB)
pdf Accessories (7.23MB)

 

Grundfos DDC 9-7 Pump

Grundfos DDC 9-7 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 9 L/hr
  • Minimum dose rate: 0.009 L/hr
  • Maximum operating pressure: 7 bar
  • 100-240 V; 14 W; 50-60 Hz

pdf Instruction Manual (3.21MB)
pdf Accessories (7.23MB)

 

Grundfos DDC 6-10 Pump

Grundfos DDC 6-10 Pump

SMART Digital diaphragm dosing pump.

  • Big, graphical LCD display with four-colour backlight
  • Click wheel interface
  • Maximum dose rate: 6 L/hr
  • Minimum dose rate: 0.006 L/hr
  • Maximum operating pressure: 10 bar
  • 100-240 V; 14 W; 50-60 Hz

pdf Instruction Manual (3.21MB)
pdf Accessories (7.23MB)

 

Grundfos DDE 15-4 Pump

Grundfos DDE 15-4 Pump

SMART Digital diaphragm dosing pump.

  • Maximum dose rate: 15 L/hr
  • Minimum dose rate: 0.015 L/hr
  • Maximum operating pressure: 4 bar
  • 100-240 V; 12 W; 50-60 Hz

pdf Instruction Manual (2.28MB)
pdf Accessories (7.23MB)

 

Grundfos DDE 6-10 Pump

Grundfos DDE 6-10 Pump

SMART Digital diaphragm dosing pump.

  • Maximum dose rate: 6 L/hr
  • Minimum dose rate: 0.006 L/hr
  • Maximum operating pressure: 10 bar
  • 100-240 V; 12 W; 50-60 Hz

pdf Instruction Manual (2.28MB)
pdf Accessories (7.23MB)

 

Promag 50P Electromagnetic Flowmeter

Promag 50P Electromagnetic Flowmeter

Electromagnetic flowmeter for bidirectional measurement of liquids with conductivity greater than 5 μS/cm:

  • Acids and caustic solutions
  • Paints
  • Pastes, mashes
  • Water and wastewater
  • Flow measurement up to 9600 m3h-1
  • Fluid temperature up to +180°C
  • Process pressures up to 40 bar
  • Fitting lengths to DVGW/ISO
 

Promag 53P Electromagnetic Flowmeter

Promag 53P Electromagnetic Flowmeter

Electromagnetic flowmeter for bidirectional measurement of liquids with conductivity greater than 5 µS/cm:

  • Acids and caustic solutions
  • Paints
  • Pastes, mashes
  • Water and wastewater
  • Flow measurement up to 9600 m3h-1
  • Fluid temperature up to +180°C
  • Process pressures up to 40 bar
  • Fitting lengths to DVGW/ISO

pdf Promag 53 instructions (5.34MB)

 

PC500 Chemical Control System

PC500 Chemical Control System

The PC500 system is a rugged microprocessor based control system designed for use in an industrial environment. The system is rated to IP65 and all exposed parts are chemically resistant.

The scalability and flexibility of the system means that it can be used for a wide range of applications including:

  • Controlling chemical concentrations in metal cleaning, phosphating & treatment plants.
  • Acctive™ software for control of accelerator in Zinc Phosphating processes
  • Totalising liquid flow in water treatment plants.
  • Monitoring and analysing waste water contamination and flow for environmental reports.
  • Monitoring levels in bulk storage systems.

pdf PC500 information sheet (0.33MB)

 

PC50F Fluoride Control System

PC50F Fluoride Control System

The PC50F is a rugged microprocessor based control system designed to measure and control Fluoride in acidic cleaners for Aluminium cans.

  • Fluoride scaled to ppm
  • Touch-sensitive colour display
  • Alarm handling and logging
  • 5-year+ historical trend of measured Fluoride ppm
  • Remote access via Ethernet
  • Chemical usage totaliser
  • Rated to IP65
 

PC45 Chemical Control System

PC45 Chemical Control System

The PC45 is a microprocessor based control system that monitors the critical stages of a metal pretreatment line. The system provides an alarm if any of the measured parameters go out of specification. Control outputs are also provided which are used to automatically control dosing pumps to hold the readings in specification.

The system can be used with most of the proprietary chemical products currently on the market.

pdf PC45 information sheet (0.50MB)
pdf PC45 Zinc Phosphate information sheet (0.50MB)

 

Grundfos NB End-Suction Centrifugal Pump

Grundfos NB End-Suction Centrifugal Pump

Grundfos NB end-suction pumps are designed and built for industrial applications where large volumes of water and other liquids need to be pumped from one place to another efficiently and reliably.

Grundfos pumps are renowned for their unmatched reliability, and the NB pumps are no exception. These all-round workhorses have stood the test of numerous applications under highly variable and demanding conditions all over the world.

Grundfos NB models are close-coupled single-stage centrifugal pumps with the motor and the pump part built together to a compact unit.

 

Grundfos NK End-Suction Centrifugal Pump

Grundfos NK End-Suction Centrifugal Pump

Grundfos NK end-suction pumps are designed and built for industrial applications where large volumes of water and other liquids need to be pumped from one place to another efficiently and reliably.

Grundfos pumps are renowned for their unmatched reliability, and the NK pumps are no exception. These all-round workhorses have stood the test of numerous applications under highly variable and demanding conditions all over the world.

Grundfos NK models are long-coupled single-stage centrifugal pumps of a modular design comprising a motor, a coupling, and a pump part, mounted on a base frame.

 

Grundfos CR Fixed Speed Pumps

Grundfos CR Fixed Speed Pumps

Grundfos CR pumps are vertical multistage fixed speed pumps.

Available configurations are:

  • CR: 304 stainless steel and cast-iron construction. Models CR1s; CR1; CR3; CR5; CR10; CR15; CR20; CR32; CR45; CR64; CR90; CR120; CR150.
  • CRI: All 304 stainless steel construction. Models CRI1s; CRI1; CRI3; CRI5; CRI10; CRI15; CRI20.
  • CRN: All 316 stainless steel construction. Models CRN1s; CRN1; CRN3; CRN5; CRN10; CRN15; CRN20; CRN32; CRN45; CRN64; CRN90; CRN120; CRN150.
  • CRT: All Titanium construction. Models CRT2; CRT4; CRT8; CRT16.

Note: model numbers give flow in m3/h.

 

Grundfos CRE Variable Speed Pumps

Grundfos CRE Variable Speed Pumps

Grundfos CRE pumps are vertical multistage variable speed pumps.

Available configurations are:

  • CRE: 304 stainless steel and cast-iron construction. Models CRE1; CRE3; CRE5; CRE10; CRE15; CRE20; CRE32; CRE45; CRE64; CRE90.
  • CRIE: All 304 stainless steel construction. Models CRIE1; CRIE3; CRIE5; CRIE10; CRIE15; CRIE20.
  • CRNE: All 316 stainless steel construction. Models CRNE1; CRNE3; CRNE5; CRNE10; CRNE15; CRNE20; CRNE32; CRNE45; CRNE64; CRNE90.
  • CRTE: All Titanium construction. Models CRTE2; CRTE4; CRTE8; CRTE16.

Note: model numbers give flow in m3/h.

 

Calibration and Maintenance Services

Calibration and Maintenance Services

  • Routine Servicing
  • Emergency Callouts
  • Annual Contracts
  • Workshop Repairs
  • Workshop Calibration
  • Application Programming
 

Stainless Steel Pump Stand

Stainless Steel Pump Stand

  • Suitable for up to 4 Grundfos Smart pumps
  • Stainless steel construction
  • PVC backplate and drip tray
  • Individual pump safety covers
  • Viewing windows in the safety covers
  • Optional pump isolation and pressure relief valves
  • Typical dimensions: 1350h x 1655w x 350d (mm, lids closed)

pdf Pump Stand Information Sheet (0.61MB)

 

Budget Pump Stand

Budget Pump Stand

  • Suitable for up to 8 Grundfos Smart pumps
  • Powder-coated steel construction
  • Typical dimensions: 940h x 1160w x 230d (mm, without pumps)

pdf Pump Stand Information Sheet (0.61MB)

 

Draw-up tube

Draw-up tube

  • Rigid PVC draw-up tube
  • Integrated filter and non-return valve
  • Available in standard lengths or custom length on request
  • Connects to hose with an ID/OD of 4/6, 6/9, 6/11, 9/12 or 10/15 mm

pdf Draw-Up Tube Information Sheet (0.80MB)

 

Page reviewed: 28th November 2017